Petroleum property analyzer
Multi Gas / Gas Chromatographs
Oil in water
Water in oil
Moisture
Sulfur
H2S / O2

Dust / Opacity

  • D-RC 120

    • D-RC 120 Automatic sampling device for gravimetric dust measurements
    The D-RC 120 is an automatic sampling device for gravimetric dust measurements to adjust or calibrate dust monitors for the measurement of dust in mg/m3.

  • D-RX 250 Combined probe

    Certified dust monitor, combined with a flow, temperature and absolute pressure measurement for monitoring of small to medium dust concentrations in dry flue gas and process gas.

  • D-R 820 F

    • D-R 820 F Extractive scattered light analyser
    Extractive dust monitor for wet sample gas to monitor low to medium dust concentrations.

  • D-R 820 F

    • D-R 820 F Extractive scattered light analyser
    Extractive dust monitor for wet sample gas to monitor low to medium dust concentrations.

  • D-R 808 Dust monitor

    • Suitability tested scattered light dust monitor for monitoring small to medium dust concentrations in dry flue or process gases.
    • With its certification range of 0 ... 7.5 mg/m3 the D-R 808 is ideally suited for monitoring very low dust concentrations.

  • D-R 800 Scattered light dust monitor

    Certified scattered light dust monitor to detect low to medium concentrations of dust in dry flue gas and process gas

  • D-R 320

    • D-R 320 The new generation scattered light dust monitor
    unique feature of the D-R 320 is the automatic background light compensation with means of a patented optical system with dual detector. This allows for an easy and quick Installation without any adjustment. A light trap is not required.

  • D-R 300 Scattered light monitor

    Certified scattered light dust monitor to detect smoke spot number in dry flue gas

  • D-R 290

    • D-R 290 Optical opacity / dust monitor 2nd generation
    The D-R 290 operates using the double-pass method according to the auto-collimation principle. The light beam traverses the measuring path twice. The attenuation of the light beam by the dust content in the measuring section is measured and evaluated.